3 Common Placement Mistake Diyers Make With Fire Sprinkler Installation

If you want to give your home a fighting chance against a house fire, there are several different ways you can beef up this area of home security, and installing a sprinkler system is definitely one of them. Even though fire sprinkler systems do an incredible job of preventing a small fire from being an all-out catastrophe, they have to be properly installed to be effective. You can pick up just about anything you need to make this a DIY task, but it is a much better idea to contact a professional for help. Take a look at some of the biggest DIY fire sprinkler installation mistakes you could make if you attempt this job on your own. 

Mistake: Not taking into the consideration the dispersion capabilities of sprinkler heads. 

Why? Fire sprinklers come in an array of different models and sizes. Each one has its specific reaching abilities depending on its size and structure. For example, smaller sprinkler heads tend to have a limited dispersion range. Because you need full coverage of every room, this is a highly important fact to consider during installation. If the models you are using will not offer sprinkler coverage for the entire room, you may have to have more than one sprinkler in the space.

Mistake: Not properly sealing and securing water delivery lines during installation.

Why? Installing a new fire sprinkler system in your home means you are essentially going to have to install new water lines throughout the house. These lines are small and compact, and for the most part, pretty resilient. However, it is extremely easy for improper installation to allow problems with water leaking from these delivery lines. With these small lines being tucked out of sight, a small leak could go undetected for a while and cause all kinds of problems with mold and water damage. 

Mistake: Not investigating how to install sprinklers on sloped ceilings. 

Why? Whether you have parts of your home with vaulted ceilings or you need sprinklers in the upstairs attic space, there is a good chance the sprinklers in these areas will be attached to sloped ceilings. If a ceiling is sloped, it can hinder and change how water is dispersed during sprinkler distribution if there is ever a fire. Without experience, it can be difficult to get the sprinklers in the right position. Many professionals use specialized sprinklers in these areas, along with specific installation methods, to insure all of the space is adequately covered. Contact a service, like Fire Extinguisher Service Center, for more help.